High Pressure Oil System IPR Air Test Tool Kit Replacement for Ford Powerstroke 6.0L-7.3L Diesel 49104592
Part Type
IPR Air Test Tool Kit
Will Fit Following Models
Replacement for Ford Powerstroke 6.0L & 7.3L (1994-2007) Complete IPR Air Test Tool Kit.
Function
With this air test tool kit, you will be able to detect even the smallest leaks! This kit replaces the ipr valve so that the system can be completely sealed and even the smallest leaks can be detected.
Package Includes
1x Hose
1x Valve
1x 6.0 ICP fitting
1x 7.3 ICP fitting
1x Air meter
2x Interconnectors
1x Jake introduction
1x PTFE tape
1x T fitting
1x Valve
1x 6.0 ICP fitting
1x 7.3 ICP fitting
1x Air meter
2x Interconnectors
1x Jake introduction
1x PTFE tape
1x T fitting
(As Pics Shown)
Easy Installation
1. Remove the air cleaner, FICM, and coolant degas bottle (turbo removal is NOT required).
2. Remove the IPR valve.
3. Thread in the tool, hand tightening using the hose; connect shop air and listen for leaks. Locate smallest leaks: Close the shutoff valve on the tool to seal the system. If desired, a scan tool can be used to monitor air pressure in the system by observing the ICP sensor reading.
1. Remove the air cleaner, FICM, and coolant degas bottle (turbo removal is NOT required).
2. Remove the IPR valve.
3. Thread in the tool, hand tightening using the hose; connect shop air and listen for leaks. Locate smallest leaks: Close the shutoff valve on the tool to seal the system. If desired, a scan tool can be used to monitor air pressure in the system by observing the ICP sensor reading.