ZUN 2KG Gold Melting Furnace Vacuum Casting Machine for Melt Scrap Silver Gold 20970993
Product Specification:
Type:Vacuum Casting Machine
Model: JH3-004
Power: 1500W
Voltage: 110V
Max melting capacity: 2KG
Max heating temperature: 1100°C
Product Size: 41.6x36.5x29.6cm/16.4*14.4*11.7in
Package size: 50*51*47cm/19.6*20*18.5in
Weight: 20kg/44.1 lbs
Application
Wide range of uses for the fusion die casting machine, ideal for jewellery processing factories and art manufacturers to make high-density and beautiful jewellery, melting recycled scrap, refining jewellery, casting all kinds of fast-melting metals including gold, silver, lead, copper, brass, bronze, aluminium and so on.
Description:
FAST MELTING: Gold Melting Furnace Line Seal All-In-One combines melting, vacuuming and casting in one machine, which can be heated quickly up to 1100°C, melting metals with melting point below 1100°C in 48 minutes. It is suitable for making gold nuggets, ingots or jewellery.
VACUUM COVER AND BUILT-IN FUEL TANK: The vacuum cover is made of thick aerospace plastic, which helps to minimise burrs and air bubbles. The built-in refuelling device can adjust the refuelling volume with reference to the standard line.
DESIGN AND CONSTRUCTION: Heavy-duty structure, reasonable layout and easy operation. Comfortable handle and rubber feet.
PRECISE PRESSURE GAUGE: Monitoring the current pressure can help you make relevant adjustments as needed to form a smooth surface.
Notes
1.Do not continuous melting casting, every two furnace interval time 40-50 minutes, the amount of more recommended to prepare several crucible rotation. 2, The melting point can not exceed 1100 °C, commonly used precious metals are within this range, casting casting is the most important part of the process.
2. The melting point can not exceed 1100°C, commonly used precious metals are within this range, casting temperature can be set, according to the actual situation, do not exceed the melting point too much, so as not to increase unnecessary load.
3. Do not melt and cast metals with high impurities, such as sand gold.
4. Pour out immediately after melting
5.This product is designed for the primary processing of hand-made jewellery. Please read the instructions carefully. If it is necessary for continuous production or mass production, it is recommended to use large power melting casting equipment.
6.Please allow the slight colour difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
Package Included
1x Jewellery Melting casting machine
1x Steel bell
1x Crucible
1x Power cable
1x Air filter
1x Graphite gasketRubber base
1x Vacuum cover
1x Crucible tongs
1x Air compressor cable
1x Gloves
1x Instruction manual
As Pics Shown