1x Tapered Ball Joint Reamer Tool & Tie Rod Tool fit for 7 Degree 1-1/2" per foot 41463293
Specification：
Over All Length: 6.51"/165.5mm
Shank Diameter: 0.5"/12.8mm
Large End Diameter: 1.1"/28mm
Small End Diameter: 0.464"/11.8mm
Shank Diameter: 0.5"/12.8mm
Large End Diameter: 1.1"/28mm
Small End Diameter: 0.464"/11.8mm
Top of Taper: 1.1"
Diameter Small End: 0.5"
Bottom of Taper: 0.464"
Material Type: 6542 high-speed Tool Steel
Degree of Taper / Taper Angle：7° （1-1/2" per foot reamer）
Flute Design: Straight
Flute Count: 6
Degree of Taper / Taper Angle：7° （1-1/2" per foot reamer）
Flute Design: Straight
Flute Count: 6
Quanity: 1 set
Warranty：2 years
Condition：New
It has 1/2" shank
They are commonly used in ball joint studs and tie-rod ends
The 1-1/2" per foot reamer is also known as a 7° tapered reamer
Function: safely reaming the tie rod hole on your spindles to accept larger tie rods
Tapered reamers fit for proper fitting of ball joints to spindles, tie rod ends to spindles, etc
High Speed Steel Ball Joint Taper Reamers are used in enlarging or deburring tapered holes
Feature:
Durable Steel Construction
Tapered reamers fit for proper fitting of ball joints to spindles, tie rod ends to spindles, etc.
It has 1/2" shank.
Tapered reamers fit for proper fitting of ball joints to spindles, tie rod ends to spindles, etc.
It has 1/2" shank.
【Conical Reamer】This conical reamer is designed fit for ball joint to spindle, tie rod end to spindle and more.
[7°Reamer Specifications] Conical Top: 1.00, Diameter Small End: 0.50, Conical Bottom: 0.464
【REAMER EASY TO USE】Each foot reamer is 1-1/2 inches also known as 7° tapered reamer.
【High Quality Reamer fit for Ball Joint】High quality reamer, reusable, ball joint insertion is very sharp and perfect.
【NOTE】The largest diameter is 28mm. Made of 6542 high-speed tool steel, it has high hardness, high wear resistance, high thermal hardness, high hardness, and sufficient plastic toughness. Can withstand high impact and high load operation
[7°Reamer Specifications] Conical Top: 1.00, Diameter Small End: 0.50, Conical Bottom: 0.464
【REAMER EASY TO USE】Each foot reamer is 1-1/2 inches also known as 7° tapered reamer.
【High Quality Reamer fit for Ball Joint】High quality reamer, reusable, ball joint insertion is very sharp and perfect.
【NOTE】The largest diameter is 28mm. Made of 6542 high-speed tool steel, it has high hardness, high wear resistance, high thermal hardness, high hardness, and sufficient plastic toughness. Can withstand high impact and high load operation
a. Notice
1. California Prop 65 Warning
2. Authority ID：MXR02FXSY（Very important, please do not delete）