Aquarium Water Chiller 300L Quiet Compressor for Reef Coral Plants USA 94584583
The compressor adopts HFC-134a refrigerant, circulating cooling, environmental protection, and pollution-free. The temperature of the chiller can be controlled at 68℉-79℉ (20℃-26℃), allowing your plants to grow more luxuriantly and axolotl more freely. It also uses a corrosion-resistant pure titanium pump, which can achieve the best between fresh water and seawater.
2 cooling fans are designed to dissipate heat in time, increase the service life of the compressor and save electricity, and better take care of your chiller. In addition, there are a large number of cooling vents on the 2 sides of the chiller to speed up heat dissipation to keep the water in the fish tank always cool. So leave 6 inches/15 cm of space around the chiller to ensure good air circulation.
The special noise-reduction design makes the compressor run very quietly, the low-noise operation will not affect your daily work and rest. And monitors the water temperature in real-time, when the water temperature is higher than the starting temperature, the chiller automatically runs to cool down. After power off and restarting, the chiller will continue to cool according to the original set temperature.
Every chiller has a tolerance value setting (F1) of 1-60. For example, I set the starting temperature to 79°F and the tolerance value to 2, then when the chiller detects that the temperature of the chiller’s water is 79°F, the chiller will automatically run and cool down until the water temperature is 77°F. Repeat cycle to cool down.
The cooling temperature is affected by the ambient temperature and the size of the fish tank. For example, when the ambient temp is 89°F, the fish tank temperature is 86°F, and the fish tank ≤300L, the water cooler can cool down to between 71-75°F. If you want to drop below 68℉, the recommended water volume is below 200L.
Package Include:
1* Water Chiller
2* Pipe joints
2* Pipe joint fixing nuts
2* Throat hoop
2* Round sealing rings