Coilovers Shocks Struts Kit Fit For Mitsubishi Lancer 2008-2016 Fit For Mitsubishi Outlander 87994731

Introduction:

MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions.

Application:

Fit For Mitsubishi Lancer(CX/CY) 2008-2016, except Lancer Evolution

Fit For Mitsubishi Outlander Sport(GA) 2011-2020

Features:

1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance.

2.Camber plate top mounts help to eliminate the need for a separate camber kit.（Front Only)

3.Pillow ball top mount - It improves the steering feel and response.（Front Only)

4. Rubber top mounts help to deliver a smooth and forgiving ride for city use at any speed and rubber joints assist in absorbing hard impacts. (only rear)

5. Twin-Tube structure allows sufficient stroke within the shock absorber.

6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation.

7. Separate height adjustment does not affect damper stroke.

8. Height can be adjusted with coilovers installed on the vehicle.

9. High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.

10. Height Adjustment tools included. 

11. Full rebuildable.

12.A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.

Specification:

Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear.

Damping: 24 levels rebound damping adjustable.

Front Spring Rate: 9kg/mm  (504 lbs/in).

Rear Spring Rate: 6 kg/mm (336 in/lbs).

Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models.

Shock type: Twin tube.

Spring Preload: 7-10 mm.

Color: Golden body with black spring

Package included:

complete coilovers 2 front and 2 rear,a pair wrench for height adjustment.

Dimension:

Package dimension : 62*50*20cm

Weight: 24140g

Notice:

The coilovers kit will "Lower your car" and does not keep to the original ride height.

Authority ID：MXR02FXSY

Notice：California Prop 65 Warning