Front Brake Rotors Kit 280mm fit for Hyundai Venue 2020-2026 Elantra 2011-20 S31584 71609986
Front Premium Drilled & Slotted Brake Rotor
Application:
| Make&Model | Year | Note |
|---|---|---|
| fit for Hyundai Elantra | 2011-2012 | 1.8L Sedan |
| fit for Hyundai Elantra | 2013-2016 | All Models |
| fit for Hyundai Elantra | 2017-2020 | 1.4L, 2.0L |
| fit for Hyundai Elantra Coupe | 2013-2014 | All Models |
| fit for Hyundai Elantra GT | 2013-2017 | All Models |
| fit for Hyundai Elantra GT | 2018-2020 | 2.0L |
| fit for Hyundai Kona | 2018-2023 | SE, SEL, SEL Plus; FWD |
| fit for Hyundai Veloster | 2012 | All Models |
| fit for Hyundai Veloster | 2013-2017 | Naturally Aspirated |
| fit for Hyundai Veloster | 2019-2021 | 2.0L |
| fit for Hyundai Venue | 2020-2026 | All Models |
| fit for Kia Forte | 2014-2018 | Sedan |
| fit for Kia Forte Koup | 2014-2016 | EX |
| fit for Kia Forte5 | 2014-2015 | EX; 11.02 inch (280mm) Front Rotor |
| fit for Kia Forte5 | 2016-2018 | EX; LX |
| fit for Kia Forte5 | 2020-2022 | EX |
| fit for Kia Seltos | 2021-2023 | FWD; S |
| fit for Kia Seltos | 2024-2025 | FWD; EX, S |
| fit for Kia Soul | 2014-2016 | All Models |
| fit for Kia Soul | 2017-2022 | Non-Turbo Models |
| fit for Kia Soul | 2023-2025 | All Models |
OE/Part number:
S-31584,S31584,31584
Specification:
- Condition: New
- Placement on Vehicle: Front, Left, Right
- Instruction Included：Yes
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection fit for dimensional accuracy and material consistency
Product size：
| Front Dirver & Passenger Side | |
| Material | G3000 Iron Alloy |
| Solid Or Vented Type Rotor | Vented |
| Rust Resistant Coating | Anti-rust oil treatment |
| Directional or Non-Directional Brake Surface |
Directional |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Mounting Bolt Hole Quantity | 5+2 |
| Mounting Bolt Hole Circle Diameter(mm) | 114.3 |
| Outside Diameter(mm) | 280 |
| Overall Height(mm) | 44.4 |
| Nominal Thickness(mm) | 23 |
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
2x Front Drilled and Slotted Disc Brake Rotor
Features:
● Heat dissipation cuts thermal fade fit for stable braking
● Lightweight build enhances handling & responsiveness
● Drainage and debris removal fit for tough road conditions
● Reduce noise fit for quiet & smooth brakin
Notice:
● New installed, if noise, it takes hundreds of miles to run in.
● If shaking, usually not installed correctly, try to instal again
● Please confirm your vehicle condition and OE number before placing an order!
● Please note that this is an after-sales part, not an original part.
● We suggest that you seek professional installation to avoid unnecessary trouble.
● .
a. Notice
1. California Prop 65 Warning
2. Authority ID：MXR02FXSY（Very important, please do not delete）