HVAC Refrigeration Fitting Kit 12458 No-Flaring Pipe Adapter with Storage Case 11062485
- Specifics
|
Type: Adapter Kit Color: Black Model: 12458 Material: Plastic, Iron Thread Size: 3/8 inch Connector Type: Adapter Size: 3/16", 1/4", 5/16", 3/8" Net Weight: 3.31 Pounds Item Dimensions: 11.81 x 11.81 x 3.94 in. |
 |
- Features
• Functionality: The 12458 Process Pipe Fitting Kit offers the quickest and simplest solution for connecting inflation lines to process pipes, suitable for system vacuuming and inflation operations.
• Professional Design: Engineered to ensure absolute sealing between piping and filling hoses
• Convenient & Safe: Eliminates the need for flaring, preventing debris from entering the system
• Versatile Application: Compatible with 3/16“, 1/4”, 5/16“, and 3/8” copper tubing
• Storage Case: Blow-molded storage case keeps kit components organized during downtime
 |
 |
 |
- Operating Instructions
Depressurize the system according to the instructions.
Note: The adapter assembly and hose must remain free of oil and water.
• Install the piercing valve on the process pipe.
• Cut off the end of the process pipe at the clamp point or behind the weld point.
• Insert the pipe cap with the appropriately sized seal ring gasket set into the process pipe.
• Screw the valve body into the pipe cap until hand-tight.
• Connect the inflation line. Perform vacuum extraction and re-inflation on the system.
• Crimp the hose using a crimping tool.
• Remove the process fitting.
• Weld the end of the process pipe.
Depressurize the system according to the instructions.
Note: The adapter assembly and hose must remain free of oil and water.
• Install the piercing valve on the process pipe.
• Cut off the end of the process pipe at the clamp point or behind the weld point.
• Insert the pipe cap with the appropriately sized seal ring gasket set into the process pipe.
• Screw the valve body into the pipe cap until hand-tight.
• Connect the inflation line. Perform vacuum extraction and re-inflation on the system.
• Crimp the hose using a crimping tool.
• Remove the process fitting.
• Weld the end of the process pipe.