ZUN 12V 20GPM Portable Fuel Transfer Pump Gasoline + Oil Meter for Gas Diesel Blue 39279177
Specifications:
20GPM 12V DC Gasoline Fuel Transfer Pump
Flow Rate: 20 GPM
Integral inlet screen
2" male NPT on bung adapter
1" of hose with nozzle
Security:pump equipped for padlocking.
Ball bearing construction
No lubrication
Dimension:14" wide X 9" high X 5" deep.
Flow Meter:
Part Number: FM-120-2
with Connection Elbow Flange
Features
- MULTI-FUNCTIONAL -- This transfer pump provides safer and more efficient transportation of gasoline, diesel, kerosene, bio-diesel and similar fuels or oils. Suitable for lawn tractors, boats, motor boats, snowmobiles and trimmers, etc.
- FITMENT -- For Transfer of Gasoline, Diesel Fuel, Kerosene, Mineral Spirits, Heptane, Hexane, E15, Biodiesel, and Similar Fuels or Oils.
- PADLOCKING -- Your pump nozzle can be pad locked to the pump for added security. With the pump turned off, and the nozzle in the stored position, a padlock can be inserted through the locking link and the nozzle handle. The locking link is located on the nozzle side of the pump, and can be pivoted into position to work with a variety of nozzles.
- WIRING INSTRUCTIONS -- Remove pump's electrical junction box cover and straighten the 3 wires to make the stripped wire ends accessible outside of the junction box. Strip 1 /2 inch of the insulation from the ends of the red and black cable wires,Using the furnished wire nuts,connect these wires to the pump wires matching to colors. Be sure no bare wire is exposed.
Operating Installation
If equipped, reset the meter to "0" (do not reset while in use or the meter will be damaged).
Remove dispensing nozzle from nozzle bo Move the switch lever to the " ON " position to power the pump.
Insert the dispensing nozzle into the container to be filled.
Operate the nozzle to dispense fluid ; release nozzle when the desired amount of fluid has been dispensed.
Installation Procedure
Thread the 1" pipe into the tank adapter. Seal threads liquid tight with appropriate sealant.
Screw the inlet flange ( with suction pipe )into the tank bung: seal threads liquid tight with appropriate thread sealant.
Mount the pump on the adapter; making sure the seal.
Package List
1* 20GPM 12V Fuel Transfer Pump with Discharge Hose & Manual Nozzle + Fuel Flow Meter (As Pics Shown)